Wednesday, 1 December 2010

New insulation method?

My plans to finish installing the carpeted panels may have been delayed, but it has heightened my search for a diesel heater. Eberspacher or Webasto? hmmm.

In answer to my first comment (thanks Phil), yes
I have had a 3 seater RIB seat fitted. It is 130cm wide leaving approx 20-25cm for some slim units that will widen behind the drivers seat to fit a fridge. It compares favourably to the rear seat of a Peugeot Partner (our old car) which comfortably fit three child seats (for 6, 5 and 3 year old).

The furniture is going to be fitted by 'Convert Your Van' in Sheffield as they have the right tools and experience to ensure a good finish, I hope!

The front passenger seat is currently a folding bench seat; the folding back allows easy access into the pop top. But I think we will upgrade to captains seats at some point as I question the comfort of the bench seat on long journeys - something I can only dream about at the moment.

Friday, 19 November 2010

3D images (day and night)

As I was writing my last post, the 3D images I have been waiting for arrived. Cheers Sandeep!

All being well this is a damned good mock-up of how the van should look when its all done...

Rib seats


The van can now function as a family vehicle! Had the Rib Altair seats fitted by vw-interiors last weekend, and it looks fab. Originally, we were going to go for the standard inka fabric but fortunately I had a change of mind and went for 'Safari Noir' (Black!) and it was the right choice, personally.


One thing I have noticed is that these seats are really deep and my three year olds feet, in particular, don't hang over the edge; instead the mud he will invariably plaster himself in will give our new fabric a real hint of safari. I think we need one of those fitted plastic covers the Americans seem to love for their sofas - I never have really worked that one out!

Under the seat you will also notice a black steel gas bottle locker, bought from GT Campers. Dan (at vw-interiors) fitted this for a small labour charge; I can't bring myself to drill holes in her myself.

I just need to finish off the rest of the insulation and carpeting...

Interior side panel carpets - part 1

It's taken me 9 days to find the time to post this, so here it is...

I chose Megavanmats 'silver' carpet for the interior due to all the good reviews. It is nice and thick and although it was about 6 degrees C when I was sticking this in it was still pretty pliable, although a hairdryer to warm it up makes all the difference.

To acclimatise myself I started off with the cards (re- using the factory fitted hardboard one for the smaller card on the pillar, and 6mm ply for the one above the wheel arch). Cut the carpet - I used sharp scissors as the stanley-type knife I had, although new, was rubbish at cutting - about 50mm wider than the card, lay the carpet on a flat surface, spray the glue on both surfaces and stick 'em together. Creases shouldn't really be a problem, but if they are they can be easily smoothed out. Glue the back side edges of the card (I wish I had bought some brush on adhesive rather than just spray, for exactly this sort of situation) and glue the carpet edges back. Where the carpet ruffles up, pinch the edges and do a tight cut with a pair of sharp scissors - simples!

Feeling brave I attempted the whole of the nearside in one go, including the wheel arch (having never tried this before but buoyed by what I have read on the T4 forum), and I am pretty pleased with the results. So long as you take your time you should do a pretty good job. Having said that, if I had attempted this ten years ago in my early twenties I would no doubt have rushed and bodged it up completely.

The wheel arches are actually very pleasurable to do, although cutting around the floor edge can be tricky. The window wasn't too difficult. Cut a 'X' in the carpet where the window is to allow the carpet to stretch into the crevices, then fold the carpet around the metal. The finish is pretty good but I still think I will try and find some aftermarket rubbers to put around the edge to give a professional finish.

I then cracked on with the wheel arch on the other side so it wouldn't be a major hassle after the Rib seat was fitted.